Now things got a bit tricky as some people mentioned that the wire harness for the doors and the driver/passenger door modules would play a key part into this.

At this time, I only had the mirrors that had the blind spot mirror. Cleared the modules DTCs from the system and the only codes I had left were the B11D6:15-AF for both modules (SODR & SODL). I then did a Module Self Test, and a Module Reset for both the SODR and SODL modules. In the Easy Mode, I was able to add my VIN # to the modules. One thing I want to add is that after adding the modules to the car, in Forscan, I was able to view the As Built Configuration and the Easy Mode Configuration for both SODR and SODL. U0534:56-08: Invalid Data Received from Side Obstacle Detection Control Module B U0533:56-0A: Invalid Data Received from Side Obstacle Detection Control Module A U2100:00-28: Initial Configuration Not Complete Both modules threw up the following DTCs along with the IPC adding two more codes to the two from above: I ran a new profile in Forscan and was able to see the SODR and SODL populate under the list of modules for the car. U0233:00-0A - Lost Communication with Side Obstacle Detection Control Module BĪfter ordering the modules from Rock Auto, I then plugged in the modules to both sides. U0232:00-0A - Lost Communication with Side Obstacle Detection Control Module A A video talked about the car (fusion) being pre-wired for BLIS/CTA and that it would be some simple programming of the modules.Īfter taking off the rear bumper, I found out that my car did have the connections for the BLIS/CTA module, and in Forscan, I was able to enable in the IPC (via Easy Mode) both Blind Spot Monitoring and Cross Traffic Alert. Laying out the post, I came across a video and multiple forums of people adding BLIS and CTA to their Fusions and/or F150s. Also in advance sorry for the long post! I wanted to be as detailed as I could be. I am hoping that a fellow Forscan user may be able to assist me with figuring out if there is a configuration or wiring issue that I am having with my 2018 Edge Titanium.

7c6-01-01 ford as built data j2534